Ford Focus Forum, Ford Focus ST Forum - View Single Post - The V6mistake Rides Again!
View Single Post
Old 01-29-2013, 06:30 AM   #31
02ztsian
Focus Addict
 
02ztsian's Avatar
 
Join Date: Oct 2004
Fan#: 14466
Location: Calgary, Alberta, Canada
What I Drive: V6Mistake, 03 ZX3

Posts: 1,125
Points 2,926, Level 33
Points: 2,926, Level: 33 Points: 2,926, Level: 33 Points: 2,926, Level: 33
Level Up 18% Completed
Level up: 18% Level up: 18% Level up: 18%
Forum Activity 4%
Activity: 4% Activity: 4% Activity: 4%
FF Reputation: 8 02ztsian Good Standing Member
Buy-Sell-Trade Rating: (14)
Diving headlong into the cruise control install-first thing was to pick up some parts and determine how to install the servo.
What $45 gets you from Picky Pull-not pictured is the clock spring as I already installed it.



Looking at things under the hood-it's pretty tight in there and there is no way this is going on the firewall. Also see some extra wires from an earlier fog light install.




Looking at this large wire loom I figured I could probably route the cable from the cabin into the engine bay.



The other end...



Carefully snaking it through and this is what I have.



Matches up at the business end like it was supposed to be there.



Had this lying around...



and fabbed up a bracket...





Once I started on the wiring I determined that I needed a few more Picky Pull treasures-a 4 pin clutch position sensor (mine only has two) and a brake position sensor (missing) and associated wiring.
I have the 10 pin plug from the cruise servo wired with extensions now it's time to start splicing in as needed.
That's it for now-will update as things progress.
02ztsian is offline  
    Reply With Quote