In the process of it. Fairly straight forward. You just need 20+ ton press to press out the old and in the new wheel bearings in. This requires you to have a 2nd mode of transport to go into a shop and have it done. That is really the hardest part.
Shop around for the shop doing the pressing. I have found a shop that will do it for $35 a bearing. Pepboys wanted $50 each...
2001 ZX3 2.0L Zetec-
Hatch Nation #42
Going through Rebuild See "The TICK Build Thread" for details (http://www.focusfanatics.com/forum/showthread.php?t=289168&referrerid=62897)