Ford Focus Forum, Ford Focus ST Forum - View Single Post - zx3 dohc solid lifter adjusment updated discussion
View Single Post
Old 01-16-2013, 08:41 PM   #1
200two-zx3
Focus Jr. Enthusiast
 
200two-zx3's Avatar
 
Join Date: Jan 2013
Fan#: 108491
Location: between the lakes, MI
What I Drive: 2002 blue zx3

Posts: 42
FF Reputation: 2 200two-zx3 Good Standing Member
Buy-Sell-Trade Rating: (0)
zx3 dohc solid lifter adjusment updated discussion

Ok I've spent hrs searching for a thread about this subject there are a few but all of thm re rom 2009 or older and non have answers so I thought I might be able to inquire on some help from the forum...

I'm running into this issue with my 02 zx3, I have pittine in my exhaust valve face area, so I took it to my local performance shop to have the valves ground and then realized if I did this id need new buckets or lifters whatever you like to call it, has any one found any new info on this, I've found these pt numbers but still haven't found anyone who sells them???
Thanks

YS4Z-6500-DADSELECT-FIT 17.145MM THICK
YS4Z-6500-EASELECT-FIT 17.175MM THICK
YS4Z-6500-EABSELECT-FIT 17.205MM THICK
YS4Z-6500-EACSELECT-FIT 17.235MM THICK
YS4Z-6500-EADSELECT-FIT 17.265MM THICK
YS4Z-6500-FASELECT-FIT 17.295MM THICK
YS4Z-6500-FABSELECT-FIT 17.325MM THICK
YS4Z-6500-FACSELECT-FIT 17.355MM THICK
YS4Z-6500-FADSELECT-FIT 17.385MM THICK
YS4Z-6500-GASELECT-FIT 17.415MM THICK
YS4Z-6500-GABSELECT-FIT 17.445MM THICK
YS4Z-6500-GACSELECT-FIT 17.475MM THICK
YS4Z-6500-GADSELECT-FIT 17.505MM THICK
YS4Z-6500-HASELECT-FIT 17.535MM THICK
YS4Z-6500-HABSELECT-FIT 17.565MM THICK
YS4Z-6500-HACSELECT-FIT 17.595MM THICK
YS4Z-6500-HADSELECT-FIT 17.625MM THICK
YS4Z-6500-JASELECT-FIT 17.655MM THICK


__________________
Claim not, dynos prove all!
200two-zx3 is offline  
    Reply With Quote