Originally Posted by KenwoodFocus
Ok I'm sorry let me clarify it cause it is confusing. There is a total of three cars. 02 SVT, 01 zx3 with 5 spd, 00 zx3 with auto. First off, I want to swap all the SVT things I into the 01 zx3. I am aware that I need to swap EVERYTHING. From the 01 zx3, I will have the engine and tranny, dash all the wiring, etc left over because I will have pulled that out. So the 00 zx3 is the one with the overheated engine and my idea was to install the engine left over from my 01 zx3 with the manual tranny into the 00 zx3 with the auto tranny. Now do I have to completly swap the dashes and all the wiring or can I just drop in the engine and the clutch pedal and shifter assemblies? Thanks again for you alls time.
Unless you want a push button start you will need the dash harness. Otherwise you will not have a clutch position switch, and by removing the ATX you will rmove the nuetral safety switch.