Originally Posted by fred2
Got the visor before Christmas and over Christmas Vacation I put in some "Peel & Seal" on the roof and trunk sheet metal. So I had the headliner down. There is a connector for the visor power already there. If you pull down the driver's corner of the headliner it is right there glued to the liner. it is near the door and not too far from the visor mounting hole. Soo I think if you pull the door seal and have the old visor out you should be able to pull the headliner down far enough to plug the new visor in
So if I'm reading this correctly, this would be a plug and play mod?