Ford Focus Forum, Ford Focus ST Forum - View Single Post - Which Remote Wire to use
View Single Post
Old 12-26-2012, 05:47 PM   #1
WyoJames
Focus Jr. Enthusiast
 
WyoJames's Avatar
 
Join Date: Nov 2012
Fan#: 106813
Location: -, WY
What I Drive: '05 Red ST

Posts: 33
FF Reputation: 1 WyoJames Good Standing Member
Buy-Sell-Trade Rating: (0)
Which Remote Wire to use

I did a search to no avail. But I'm in the middle of installing my new pioneer dvd HU. Car still has the stock sub/amp for now so I have the premium scosche wiring harness (the main wire harness and the small wire harness). I have the resistor I read that I needed to tap onto my ground wire to prevent the sub "pop"...BUT...getting ready to hook everything up and I have 3 factory amp remote wires in the scosche harness.

I have one remote wire coming out of the HU...not a problem

Main scosche harness has 1 remote wire - BLUE

Small scosche harness has 2 remote wires - BLUE/WHITE

Which remote wire do i use? Do I just splice all the together with the 1 remote wire coming off of the headunit? And with all these remote wires everywhere...where do I put the resistor?

Any help would be greatly appreciated...thanks guys.


WyoJames is offline  
    Reply With Quote