[02fordsvt]

Two options I would suggest.

One would be to repaint everything with black paint again. It's pretty straight forward with the hardest part being taping off everything surrounding the trim so you don't get over spray. If you put a little bit more time into it, you can get a high gloss finish on all the trim rather than the flat black that it was from the factory.

The second option is to use black Plastidip. It's much like paint except it can be pealed back off if you don't like it or if you get a little bit of over spray. You wouldn't even have to tape anything off before spraying and just peal it off from the windows when your done.