Focus Fanatics - View Single Post - Coolant in #2 spark plug hole of Zetec.
View Single Post
Old 12-22-2012, 10:52 AM   #4
Captain TMI
whynotthinkwhynot's Avatar
Join Date: Jan 2005
Fan#: 18416
Location: the armpit of TN, Memphis, TN
What I Drive: 05 ZXW; 02 Windstar; 13 C-Max SEL

Posts: 20,064
FF Reputation: 270 whynotthinkwhynot Outstanding Standing Memberwhynotthinkwhynot Outstanding Standing Memberwhynotthinkwhynot Outstanding Standing Member
Buy-Sell-Trade Rating: (1)
Try this article's advice, and be careful not to strip it. IIRC, it's an aluminum plug. If it's not, heat might help, but you'd have to be careful not to heat the plug itself- just the aluminum around it. I'm not sure if I'd want to go that far, so that's a last resort IMO. Try the mix mentioned above, and let it soak in. You might want to try some minor acid action as mentioned. When you re-install the plug, I'd use loctite- blue or green- to prevent a future galvanic reaction.

Best lube for Rusty Nuts
Be eclectic.
---The Complete How-To Archive--

Moderating everything now, let me know if I can help.

Originally Posted by the user formerly known as ZX3_Chick View Post
You're special aren't you.
whynotthinkwhynot is offline  
    Reply With Quote