Originally Posted by Baldurs390
ok so i opened up the steering colum and i located the turn signal idiicator orange and white wire... i cut it... turn my car on fogs stay on while i have the high beam leaver pushed foward... buit i have no high beams... if i pull it back as to flash my high beams the projector comes on but then i lose the fogs?
what did i do wrong
...... huh, that's very strange. I am not too sure at this point, as far as I knew that wire was an interrupt wire and shouldn't have done that.
Short of finding a wire diagram of the stock wiring harness I am have no ideas... I suggest reattaching the wire for now...