Focus Fanatics - View Single Post - Duratec Intake Manifold Removal and PCV hose replacement
View Single Post
Old 12-14-2012, 12:55 PM   #88
Math_Rulez
Focus Rookie
 
Join Date: Dec 2012
Fan#: 107311
Location: San Diego, CA
What I Drive: 2004 Focus

Posts: 1
FF Reputation: 1 Math_Rulez Good Standing Member
Buy-Sell-Trade Rating: (0)
First I want to thank everyone for the posts. I had to replace my PCV hose and this forum was a huge help.

Unfortunately, after I replaced the hose, my idle is too high, (1100). I've checked for vacuum leaks and double checked everything. I took it to a shop for a 1 hour diagonstics and they did not find anything. When I replaced the hose, I didn't put on new intake gaskets, so I decided to try new gaskets for the intake and also a new PCV value. Still high idle. I replaced the TPS today and it is still a high idle. It feels like the rpm hangs or doesn't return to normal while I'm driving.

I am getting a code, P0507 (high idle) DUH!

Any help and suggestions would be great.

Thanks
Math_Rulez is offline  
    Reply With Quote