Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Ford Focus center bore size on 2013 focus se hatch
View Single Post
Old 12-02-2012, 11:00 AM   #13
sailor
Crankshaft
 
sailor's Avatar
 
Join Date: Jun 2008
Fan#: 57268
Location: Williamsville, NY
What I Drive: 2004 Pitch Black ZTS 2.3 5spd.

Posts: 16,643
Points 11,872, Level 71
Points: 11,872, Level: 71 Points: 11,872, Level: 71 Points: 11,872, Level: 71
Level Up 56% Completed
Level up: 56% Level up: 56% Level up: 56%
Forum Activity 99%
Activity: 99% Activity: 99% Activity: 99%
FF Reputation: 79 sailor Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Umm....

48-25=23, 23 is less than 55 by 33mm, so with 48 mm offset wheels & a 25mm spacer your wheels would stick out 33mm more than the stock ones.

Not understanding your 1.25" adapter post, Zillon was guessing a typical 25mm thickness for adapters - do you know the actual thickness of the ones you want to use?

Hmmm - if they ARE 1.25" thick, that would be roughly 29mm (not near the ruler I like to use for a quick check of rough estimate), so about 36mm extra stick out....
sailor is online now  
    Reply With Quote