Quote:
Originally Posted by satcomtim
Installed the MS3 RMM today and then got stuck doing the Steeda RSB.
I can't figure out to remove it from the endlinks. I have the 18mm bolts off and the 4 bolts holding the factory bar removed. Now the factory bar is just hanging there and I can figure out how to get it off. The instructions just say remove it. Thanks for any help!
Tim
|
Remove one of the end links from it's mounting point on the car. There is a nut and you'll need an allen wrench to hold the bolt/endlink at the top so you can loosen the nut.