Focus Fanatics - View Single Post - wire loom
Thread: wire loom
View Single Post
Old 11-24-2012, 12:48 PM   #11
drewts86
Focus Enthusiast
 
Join Date: Feb 2010
Fan#: 72974
Location: san jose, CA
What I Drive: 2004 Burgundy ZX3

Posts: 121
FF Reputation: 1 drewts86 Good Standing Member
Buy-Sell-Trade Rating: (0)
Actually, if you've got the time and energy these will look even better


http://www.cabletiesandmore.com/ExpandableSleeving.php

They take more time because you will have to pull the connectors off of the ends of the wires you plan on wrapping, but in the end in will look much better/cleaner. You'll need computer modding tools to pulls the pins out of the connectors without damaging them. You'll also want to use heatshrink on the ends of the wire cover as well, and they have colored heatshrink if you'd like to match everything. http://www.frozencpu.com/cat/l2/g35/...at_Shrink.html

Something like this for the wire tools to pull the connectors:

http://www.frozencpu.com/cat/l3/g2/c...val-Page1.html

I use those tools and the braided cable sleeving to mod all of the computers I've ever built. If you decide to go that route, PM me for any advice you need.
drewts86 is offline  
    Reply With Quote