Focus Fanatics - View Single Post - Speedo doesnt work but replaced everything.
View Single Post
Old 11-19-2012, 11:14 PM   #2
iminhell
C2H5OH
 
iminhell's Avatar
 
Join Date: Jun 2006
Fan#: 36222
Location: Darwin, MN
What I Drive: 2000 & 2001 ZX3's

Posts: 10,389
FF Reputation: 48 iminhell Great Standing Member
Buy-Sell-Trade Rating: (4)
Quote:
Originally Posted by CBC&MLGZX3 View Post
my biggest being that the speedometer keeps jumping and then going to zero. odometer also blanks out occasionally. So I have replaced the Vehicle Speed Sensor, the coil pack along with wires and plugs.
Most times replacing those parts should fix this problem. The fact it didn't means it's probably in the wiring. Unfortunately there's no easy way to test it. What you'll probably end up having to do is replace the wiring from the VSS to the ECU.




Quote:
Originally Posted by CBC&MLGZX3 View Post
I also have oil coming out of my oil filter which has been going on for a while.
Umm.
What?
I surely hope you misspoke there and meant Valve Cover Gasket.
Any oil leaking from the oil filter is very bad and should be fixed immediately. Do not drive the car until it is fixed.



Quote:
Originally Posted by CBC&MLGZX3 View Post
Its ruined about 3 driver side motor mounts since i began driving the car. does anyone have an answer to this problem?

Many have had back luck with parts store brand motor mounts. But many have had good luck with Motorcraft mounts.
Solution, replace with factory mounts.
__________________
Don't "think outside the box".
There is no box.
Do it correct, or do it twice.
iminhell is offline  
    Reply With Quote