Ford Focus Forum, Ford Focus ST Forum - View Single Post - Heat not working.
View Single Post
Old 11-17-2012, 05:07 PM   #14
sailor
"Elder"
 
sailor's Avatar
 
Join Date: Jun 2008
Fan#: 57268
Location: Williamsville, NY
What I Drive: 2004 Pitch Black ZTS 2.3 5spd.

Posts: 15,593
Points 10,817, Level 68
Points: 10,817, Level: 68 Points: 10,817, Level: 68 Points: 10,817, Level: 68
Level Up 92% Completed
Level up: 92% Level up: 92% Level up: 92%
Forum Activity 99%
Activity: 99% Activity: 99% Activity: 99%
FF Reputation: 72 sailor Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Fuse, Switch, resistor, motor.

In order of ease to check, you already checked for power at the motor - so next check the fuse for power on both sides (installed) - then look for power at the resistor pack & lastly the switch (just 'cause it's hardest to access).

FWIW, a good procedure with the meter is to test a known good 12v. source, to make sure you've got a good ground & the meter is working/set right.

Just hooking to metal doesn't always work due to ungrounded parts or poor connections. (getting fooled is easy, getting dependable results takes some effort)

Luck!
sailor is online now  
    Reply With Quote