Originally Posted by pyroinsa
Any auto parts store carries it, look for the paint code on your door, it should be a 2 letter code and just match it up to the rattle cans. Yes I sanded after I applied plastic primer going from a 400 all the way to 1000 grit. Sand between coats and keep stepping up the sandpaper to a finer grit each time. Clear it in the same manner, but use1500 grit between coats of clear, followed by a rubbing compound and wax a week later
Sent from my iPhone using FF Mobile
bad thing is my driver side door is from a diff car and the stickers are gone. can i get it from the vin? its that light silver color.
Sent from my N860 using FF Mobile