Focus Fanatics - View Single Post - 2013 Focus owners, I need your help!
View Single Post
Old 11-11-2012, 05:23 PM   #1
Zillon
Focus Addict
 
Zillon's Avatar
 
Join Date: Jan 2005
Fan#: 17393
Location: Philthadelphia, PA
What I Drive: '13 GTI

Posts: 1,387
FF Reputation: 27 Zillon Great Standing Member
Buy-Sell-Trade Rating: (3)
2013 Focus owners, I need your help!

Hey guys,

Long story short, over the last year, I've been through a nightmare with front suspension clunking issues on my 2012 Focus. I've tried multiple fixes on my own coin; new springs, new dampers, new strut mounts, new strut bearings, new strut mount bolts, higher torque specs, etc. While the stiffer ST strut mounts did help a lot, the noise is still present.

As of tonight, though, something critical has possibly come to light.

Here's a photo of a 2013 Focus Titanium strut tower (courtesy of Phokus):


For comparison purposes, here's a photo of my strut tower on my '12 SE.


Note the thicker bolt spacer and the fact that my car does NOT have the 4-5mm thick steel plate under the factory strut tower brace. This plate signifies that Ford has recognized that there was a problem with early production vehicles, and has fixed it with the addition of that plate. However, though it seems that they have found a fix, they have refused to even offer this as a fix to existing 2012 owners, of which there are dozens, with the same issue. While some have had success in getting Ford to replace parts under warranty, the noise always comes back, or never even goes away. I also haven't see any complaints from 2013 Focus owners about suspension noise.

Here's my request: Tell me whether you have had any issues with clunks or rattles from the front strut area. List your build date, and trim level. Also, if you can, I just need a few of you to grab a quick photo of your strut tower area on your car, similar to the photo of the 2013 Focus Ti that I posted. It doesn't need to be a fancy photo, I just need proof that the 2013 Focus does come with this strut tower plate.

Also, if there are any Ford techs or parts employees on here, it would be super awesome if you could locate the part number for the bolts and the plate. Fordparts.com seems to not have the part listed anywhere.

I would really appreciate any help you could offer. I've wasted far too much time, money, and energy on a problem that Ford refuses to acknowledge with it's customers. Others are suffering from the same frustration. Here's the thread on here about this issue: CLICK.

Thanks guys.

Zack


__________________
Joined the dark side.

Last edited by Zillon; 11-11-2012 at 06:57 PM.
Zillon is offline  
    Reply With Quote