camber arms and toe arms
I just installed the camber and toe arms on mine this weekend. I like the quality.
I forgot to measure when I had it up on the jacks but what size is the jam nut? I used a adjustable wrench to tighten them but an open end wrench would allow more easy access but I didn't have one that big.
Oh I thought I'd mention that yo may want to offer a reminder to those folks that install the camber arms that they need to know if a set of M12x1.75 nuts may be needed also. I had to get a couple since my trailing arms had been modified to allow for a camber bolt kit. The factory nut is cut off the trailing arm bracket to put the camber bolt kit on.
2003 SVT Focus, Comp Orange, EAP. Cervini's rear spoiler, Eibach sway bars, Steeda Springs, K&N filter, steeda shifter, Massive camber arms, toe links, engine mount bushings.
other car: 2004 SVT Cobra Coupe, Screaming Yellow, 2.76/2lb lower...
Last edited by bbcobra; 11-09-2012 at 08:14 PM.