Originally Posted by zachinnis
I cleaned all the plugs and wires, the only ones that really had standing oil were 1-2 from the left. Plastic valve cover i do believe, I tightened it down best i could without breaking the gasket, seems to be holding, no more oil in on the plugs. I labeled the plugs before removal, assuming they were Right In the first place, next on my list is the alt. Later today.
Based off the code you pulled,I would think it was just from the oil on the plugs.
If no more oil is seeping,I would think it should be good to go now.
Is it still throwing the code?
Also,what condition are your plug wires in?