Focus Fanatics - View Single Post - Cosworth IM install - what a NIGHTMARE
View Single Post
Old 10-21-2012, 02:14 PM   #2
PSUrivie
Focus Fanatic
 
PSUrivie's Avatar
 
Join Date: Jul 2009
Fan#: 67329
Location: Elkridge, MD
What I Drive: Boostin in the Mid-A

Posts: 2,047
FF Reputation: 15 PSUrivie Great Standing Member
Buy-Sell-Trade Rating: (10)
The little support bracket that comes with the intake should go on last. With it removed, it will give you enough clearance to get to the bolt. I had to use a 1/4" drive ratchet with a short handle and a deep socket. That gave me enough clearance to tighten the bolt up. This is definitely a bolt you need to get to from underneath the car.

The PS pressure sensor you can twist a little to give you the clearance to bolt the mani up.

Didn't you get a dipstick with your intake mani? Mine installed fairly easily. The dip stick bracket didn't line up perfectly though. I just had to bend the dip stick a little for it to line up.
__________________
150whp/135lbs-tq @ 13lbs.
PSUrivie is offline  
    Reply With Quote