Focus Fanatics - View Single Post - Technical Difficulties
View Single Post
Old 10-11-2012, 07:15 AM   #5
rheath011
Focus Rookie
 
Join Date: Oct 2012
Fan#: 104551
Location: Harker heights, TX
What I Drive: 2000 focus zts

Posts: 17
FF Reputation: 1 rheath011 Good Standing Member
Buy-Sell-Trade Rating: (0)
thank you but I already replaced the resistor pack with no effect.
I have since confirmed the old resistor was functioning

Thank you !!!
THe picture is a graet help!
I agree if there is a heater control module that is a more likely suspect!
Resistor pack is good but I was unaware of heater control module
THANK YOU!

My next step was to see if I could ground through the switch ( to get speed controls back) My guess is that is exactly what the heater control module does !!!
Thank you once again

the only thing I can find related to "heater control module" at my local part stores is called a heater control pigtail which appears to be nothing more than the connecter to the fan switch. is this what you werre talking about ??

sorry the sun just came up here.... went out to the care and I am pretty sure I found the part you are talking about . the wires that actually plug into the resistor correct ??
__________________
----- The first 49 years of my childhood have been real hard on me ------

Last edited by lildisco; 10-16-2012 at 03:58 PM.
rheath011 is offline  
    Reply With Quote