Originally Posted by zx3_bmxrider
I just got done doing all of that with the rear. I had to completely remove everything. By time the rear crash bar would be shaved down, it would be less than an inch thick which really has no point. lol So I removed the whole bar, and replaced it with a piece of angle iron to keep the form of the bumper in case I bump into anything. I figured if I get rear ended one day, I would have to replace the hatch and bumper anyways. I was wanting a euro front, so i will definetly keep an eye out in this thread for progress and to see how hard it is. :) good luck!
Thanks, I'll keep all of you posted!
Sent from my SAMSUNG-SGH-I717 using FF Mobile