Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Zetec valve adjustment....
View Single Post
Old 10-08-2012, 10:30 PM   #7
amc49
Focus Fanatic
 
Join Date: Mar 2012
Fan#: 96610
Location: Fort Worth, TX
What I Drive: 00 wagon, 02 sedan both zetec atx

Posts: 5,553
Points 3,204, Level 35
Points: 3,204, Level: 35 Points: 3,204, Level: 35 Points: 3,204, Level: 35
Level Up 3% Completed
Level up: 3% Level up: 3% Level up: 3%
Forum Activity 57%
Activity: 57% Activity: 57% Activity: 57%
FF Reputation: 25 amc49 Great Standing Member
Buy-Sell-Trade Rating: (0)
That's fine. The intakes hardly wear at all, when I pull them down I simply lap them a bit and throw them back together. The tappets or shims will stay the same. The exhausts however wear quite a bit, as they do they will close up clearances. If I pull head down I recut exhaust valves and seats. I tell the grinding guy not to cut stem tips, then instead of changing tappets or shims (I have one of each) I grind the valve tip to set up the clearance.
amc49 is offline  
    Reply With Quote