If anyone has focuses in their local junk yard feel free to go pull one out and I will pay you.
They twist out one way like a bulb socket and then you have to pull the rod with the ball socket on it out
This piece pushes in and turns like a bulb socket. It has a screw attached to it with a ball on the end which pops into the joint located on the back of the reflector inside of the headlight.
I did my projector retrofit today, everything went perfect except I broke one, so my lights are too low!
This is the piece here, slides in and twists
If you have a focus at a local junk yard help me out, car is currently undriveable at night