Ford Focus Forum, Ford Focus ST Forum - View Single Post - 2.3 MTX-75 Bolt pattern
View Single Post
Old 10-01-2012, 05:51 PM   #2
whynotthinkwhynot
Captain TMI
 
whynotthinkwhynot's Avatar
 
Join Date: Jan 2005
Fan#: 18416
Location: the armpit of TN, Memphis, TN
What I Drive: 05 ZXW; 02 Windstar; 13 C-Max SEL

Posts: 20,219
Points 27,353, Level 98
Points: 27,353, Level: 98 Points: 27,353, Level: 98 Points: 27,353, Level: 98
Level Up 1% Completed
Level up: 1% Level up: 1% Level up: 1%
Forum Activity 17%
Activity: 17% Activity: 17% Activity: 17%
FF Reputation: 270 whynotthinkwhynot Outstanding Standing Member whynotthinkwhynot Outstanding Standing Member whynotthinkwhynot Outstanding Standing Member
Buy-Sell-Trade Rating: (1)
Well then, take a measuring tape to the center of the holes on the old one and one to the one installed in the car. I always used a fabric tape- like what is used for measuring sewing projects. Then you can put it around the trans and measure the distances between all of the holes at once- example: 1= 1", 2=6", 3=11" and so on. Then you can wrap that same tape around another transmission to see if the centers of the holes line up with what you measured on the other more easily than measuring the distance between each set of holes.
__________________
Be eclectic.
---The Complete How-To Archive--

Moderating everything now, let me know if I can help.

Quote:
Originally Posted by the user formerly known as ZX3_Chick View Post
You're special aren't you.
whynotthinkwhynot is offline  
    Reply With Quote