Originally Posted by craigsfocus
The projectors themselves do not have an adjustment. But today I figured out they needed to go up more. So I had to adjust them up using the factory adjustment.
I wasn't able to figure out the relay to prevent the dash light. I spent hours trying to, but the Focus won that round.
I guess I was more thinking if you didn't round the holes our correctly (not saying you did this... but I could very easily see me doing this) that the projector would sit off center. Then you'd want to try and compensate some how to help line them up. You wouldn't really know if you were off until you put them on the car. I just like to ensure everything looks good before putting the lens back on.