Ford Focus Forum, Ford Focus ST Forum - View Single Post - "HOW TO" Ebay Halo Projector led replacement (56K WARNING)
View Single Post
Old 08-15-2012, 11:20 PM   #185
BIMMERKID21
Focus Enthusiast
 
Join Date: May 2012
Fan#: 98852
Location: Faribault, MN
What I Drive: 2001 Ford Focus ZTS Twilight Blue

Posts: 294
FF Reputation: 1 BIMMERKID21 Good Standing Member
Buy-Sell-Trade Rating: (1)
Hey I'm looking at the directions and it's sorta vague....

3.
You can also connect the black wire from halo and LEDs on the ground wire of driving lights .. White wire goes to positive wire of driving light...

Well here's my scenario.

I have a euro grill, so my us grill is going bye bye... I got a new socket that's 1157 and fits the housing instead of the 1156 housing. I have the projector style led switchback amber/white xenon bulbs...
Now the socket had two black wires on it for major minor..l but no ground, so I soldered a grounding wire to the metal base / side of the socket...

Now what I like to do is cut the connector off the grill light wires...

All I know is take the grounding wire on the new socket and wire to the ground wire on the stock harness....but what about the other two wires the socket came with Zero info about which wire is major or Minor....

Now which wires would I tap the + and -s of the halos and LEDs to?

And which wire off the new socket goes to which wires in the stock wire harnes?
__________________
Midwest Crew
BIMMERKID21 is offline  
    Reply With Quote