Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Camber Question
Thread: Camber Question
View Single Post
Old 07-25-2012, 05:07 PM   #17
gregm5s7
Focus Enthusiast
 
gregm5s7's Avatar
 
Join Date: Mar 2012
Fan#: 97075
Location: Portland, OR
What I Drive: 2008 Ice Blue SE

Posts: 117
FF Reputation: 2 gregm5s7 Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by SVTFocusOnMe View Post
In my book wider rim = wider tire, or whats the point?
I wanted to run a 225 and the rubbing doesn't really drive me crazy I can live with it, Just looking into options on how to get rid of it.
I think 8" is pushing it on the Focus, the recommended wheel width is listed at 7" to 7.5". I'm sure there are plenty of people running 8" wheels but they have really dialed it in to avoid rubbing

I believe the stock SVT and EAP wheels are listed at ET49

So with ET40 wheels, you are gaining +9mm in clearance on outside. But with a 1" wider wheel, losing 13.7mm clearance on each side. So your net difference is 4.7mm outside clearance lost on just wheels dimensions. Add to that a larger tire in width AND height as Nick mentioned, it's easy to see how clearance starts to go by the wayside

I think it was talked about also in a different thread but tires in a 225/40/17 size aren't made besides racing applications, Which would have been a preferred size to 225/45

Hopefully the fender mods solve your problems!
__________________
FRPP Kit
Papa Smurf II
gregm5s7 is offline  
    Reply With Quote