Focus Fanatics - View Single Post - Another SGM MKIII Build Dyno Thread!
View Single Post
Old 07-09-2012, 03:20 PM   #20
dyn085
That Guy
 
dyn085's Avatar
 
Join Date: Apr 2012
Fan#: 98047
Location: Fayetteville, NC
What I Drive: 2014 FiST/FoST

Posts: 11,894
FF Reputation: 46 dyn085 Great Standing Member
Buy-Sell-Trade Rating: (5)
Quote:
Originally Posted by Tom View Post
This is great information, thanks for sharing.
No problem, thanks for noticing!

I will be running another couple of dyno runs upon the completion of the Newmission Mod during cooler weather as I want to see what increases there will be from my current setup. I'm pretty confident that the total will be equal to that of the named CAI's, with the additional benefit of a marginal pressurization of the box at speed. I'm just currently stuck at the amount of air that my stock box has access to. Given temperature fluctuation, I will fabricate a block plate that will be able to close off whatever size hole I end up with at the box side of the mod. This should allow for a couple of runs without the larger hose connected as that days baseline, and also give a minor cool down while removing the plate and connecting the hose. Then, we should have actual numbers of the gain seen by the mod.

Idk, probably over-thinking it. I just like collecting and analyzing data.
__________________

FocusFest 2013: Best of Show
Gateway FFW: Show Class Outstanding
September '13 ROTM
2014 FiST-
dyn085 is offline