Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Another SGM MKIII Build Dyno Thread!
View Single Post
Old 07-08-2012, 09:04 AM   #2
dyn085
That Guy
 
dyn085's Avatar
 
Join Date: Apr 2012
Fan#: 98047
Location: Fayetteville, NC
What I Drive: 2014 FiST/FoST

Posts: 12,326
Points 24,655, Level 95
Points: 24,655, Level: 95 Points: 24,655, Level: 95 Points: 24,655, Level: 95
Level Up 31% Completed
Level up: 31% Level up: 31% Level up: 31%
Forum Activity 8%
Activity: 8% Activity: 8% Activity: 8%
FF Reputation: 49 dyn085 Great Standing Member
Buy-Sell-Trade Rating: (5)
Here is my dyno info from my previous run (cooler weather). This is a hybrid from my informational posts and dyno chart posts of the runs:

Started the morning on the dyno, with my buddies Tuxedo Black Ti waiting patiently so that I could get a baseline with the stock filter. Did a quick pull so that he could get going and came up with 142 hp on the OEM filter. This was the uncorrected number, and unfortunately we had set the calibration incorrectly so the torque number was unusable. Unless you care to believe that I made over 240 ft lbs. Then, it was a bad-azz Ti.

I threw the OEM filter back in my buddies car so that he could get off to his son's baseball game. I threw my K&N filter back in, we re-calibrated the dyno, and made a few more pulls. The most usable number was 156 hp, 144 ft lbs (SAE).

Here is the uncorrected chart-

Here is the SAE corrected chart-
__________________
FocusFest 2013: Best of Show
Gateway FFW: Show Class Outstanding
September '13 ROTM
2014 FiST-
dyn085 is offline