Another thought I had would be to put a small "bead" of epoxy around the O.D. of the MAF flange, and let it fully cure before reinstalling the filter. This would give the clamp a "lip" that it couldn't slide over.
'12 SE Sport 5Dr |╠╬╝|Sterling Grey Metallic|203a|Moonroof|17" Mach/Paint Whls|K&N Typhoon|MS3 RMM|Steeda STB, RSB
'01 ZX3|╠╬╝|Pitch Black|Prem. pkg.|Moonroof|SVT Snorkel|SVT Springs|S2 Dampers|Steeda STS|Magnaflow exh.