Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - The TICK build thread
View Single Post
Old 06-04-2012, 11:50 AM   #15
Magus2727
Focus Fanatic
 
Magus2727's Avatar
 
Join Date: Feb 2009
Fan#: 62897
Location: Salt Lake City, UT
What I Drive: 2001 Malibu Blue ZX3

Posts: 4,345
Points 8,117, Level 60
Points: 8,117, Level: 60 Points: 8,117, Level: 60 Points: 8,117, Level: 60
Level Up 84% Completed
Level up: 84% Level up: 84% Level up: 84%
Forum Activity 24%
Activity: 24% Activity: 24% Activity: 24%
FF Reputation: 9 Magus2727 Good Standing Member
Buy-Sell-Trade Rating: (2)
Name that gasket

I got the Fel-Pro lower gasket kit from C-F-M I have already installed the rear main (along with its gasket)



I have also identified in the above image (from right to left) the PCV/oil seperator gasket, oil pick up gasket, front main seal, oil pump gasket.

I have not gotten to the point on using the other 4 gaskets. I am guessing that the large paper gasket is for the water pump. This remains the large black and small brown rubber o-rings and the ridged white plastic o-ring.

Also in regards to the oil pick up. Right now there is a soft green gasket recessed in the top of the tube, this is the gasket I was expecting in the kit... do I remove this gasket and use only the full paper gasket?

Thanks!!
__________________
2001 ZX3 2.0L Zetec-
Hatch Nation #42

Going through Rebuild See "The TICK Build Thread" for details (http://www.focusfanatics.com/forum/showthread.php?t=289168&referrerid=62897)
Magus2727 is online now  
    Reply With Quote