Ford Focus Forum, Ford Focus ST Forum - View Single Post - FI Duratec fuel requirements
View Single Post
Old 05-31-2012, 06:13 PM   #4
1turbofocus
FF Affiliate
 
1turbofocus's Avatar
 
Join Date: Oct 2003
Fan#: 1123
Location: Belmont, NC
What I Drive: 2000 ZX3 / 2002 SVT Turbocharged

Posts: 21,786
FF Reputation: 153 1turbofocus Excellent Standing Member 1turbofocus Excellent Standing Member
Buy-Sell-Trade Rating: (28)
You are correct , its the fuel pump not the Injectors

Idealy you want 1psi fuel psi fro each psi of boost with base fuel at 41psi , so 10psi boost you would want 51psi fuel , this is hard to do with the tuning software we have to use and the returnless fuel system , so what happens is as you go up in boost the injectors do x amount of dutycycle as the fuel psi falls off the dutycycle goes up to make up for the loss/lack of fuel psi to maintain A/F this is why it is best to always run larger injectors then needed because you burn up a lot of injector dutycycle just from not having enough fuel psi

With a return system you put a Vac line on the fuel psi regulator so every psi of boost adds 1 psi of fuel psi , makes life easier

Tom
__________________
Focus-Power: Your #1 Source for Ford Focus Speed, Tuning & Performance!

Customer Support
AIM: hpdyno
Email: hpdyno@aol.com
Phone: 704-249-3745
Site: focus-power.com

Elder 1turbofocus
1turbofocus is offline  
    Reply With Quote