I have to cut out my LCAs.
After a 7 hour-battle with one
LCA-to-knuckle bolt, I busted out the angle grinder with a 4-inch cutoff wheel and she came out no problem.
I then ground off the nut welded to the knuckle. I'm simply going to cut off the remaining three bolts without even trying to wrench them, F-it!
I just got off the phone with John @ Hilbish Parts Department - $253.76 *shipped* for two new LCAs, bolts and nuts on both ends, and the cam washers for the inside ends.
I'll have it all Thursday - AWESOME!