Originally Posted by Charged SVTF
Well if you are using just one can each wheel; thats not enough in my mind. Im using about 2.5 per wheel; doing the inside the front obviously; but also the back and inside. Plus I also plan on using the gloss clear after this base coats are down to make them slightly shiny. So thats a lot of cans my friend at almost $12 a can from Ace.
As far as pitting; was 70 degrees where I did it; only thing I can think of was humidity was 70%....but the weather in the garage was great so I just think it was more me not being able to get an even spray between the spokes.
you need to call a different ace store in your immediate area. the one you went to ripped you. hell you can go to the ace hardware website and order it for 8.49 and have it shipped to the store for free!!
2 Sundown X10's in 2.5cuft Net tuned to 31.65hz
SKAR SK-1500.1d, SKAR SK-85.4
Lots of Audio Technix 0 gauge
XS Power 1200,XS Power XP3000
I murder lowssss