I went to pull-a-part today and found a couple foci that had cruise still on them so I pulled one off an SPI automatic.
I've got it all figured out (I think) except where to tap into the ignition power. Below is everything mocked up. Out of the 10 pins on the connector 8 are used (pins 2 and 8 are blank).
If someone wants to verify that this can work please let me know and I'll make a full write up with pics on how to pull everything too.
I know the pictures are huge but the images within the image are close ups that I shrank down to give a clearer picture of details. If you zoom in fully you'll be able to see all the little numbers on the connector pictures that were added into the image.