Ford Focus Forum, Ford Focus ST Forum - View Single Post - How To Make Your Own Wiring Harness For Fog Lights
View Single Post
Old 09-01-2011, 02:31 PM   #46
saznat
Focus Rookie
 
Join Date: Jun 2011
Fan#: 86647
Location: London, United Kingdom
What I Drive: 1999 Black MK1 Focus CL

Posts: 16
FF Reputation: 1 saznat Good Standing Member
Buy-Sell-Trade Rating: (0)
Hi Tony. I have a 1999 Focus CL and had the same problem as yourself. The extra wire for front fogs was in the plug that connected to the light switch. After hunting for ages, I concluded that the loom for the fogs wasn't there and had to make one. I have no idea where that wire from the light switch goes. I couldn't follow it without taking the dash apart and I wasn't going to do that so I ran a wire through the firewall and used a skotchblock to join it to the foglight wire on the switch and it all works fine. I'm afraid you'll probably have to do the same. Hope this helps!

Last edited by saznat; 09-01-2011 at 02:32 PM. Reason: Spelling mistake
saznat is offline  
    Reply With Quote