Focus Fanatics - View Single Post - Lets see what this heat maker can do-JRSC build
View Single Post
Old 08-06-2011, 08:38 AM   #1
GT40 all the things!
disciplerocks's Avatar
Join Date: Sep 2008
Fan#: 59330
Location: Evansville, IN
What I Drive: 04 ZX3, 12 Hatch

Posts: 9,427
FF Reputation: 13 disciplerocks Great Standing Member
Buy-Sell-Trade Rating: (17)
Lets see what this heat maker can do-JRSC build

So I am planning on gathering parts and start building this winter. Been working on a couple things so far.

Current setup:
6.5" crank pulley
2.6" blower pulley
ZX2 cams
SVT airbox
OBX header/catback
FC cam gears

List of plans:
Head milled and mildly ported
Larger valves
Replace the M45 with a mildly ported M62
Smaller sc pulley (offset is different for the GM M62, undecided on size)
Aluminum flywheel and clutch (undecided on clutch)
SVT rods (undecided on pistons)
W/M or N2O (DD, but will rarely see high boost)
Tube arms (built by me)
Traction bars (built by me)

Now this is what I have so far

Brand new aluminum flywheel

SVT rods and pistons with new rings and bearings installed

And an M62 off a 95 Riviera

The blower is getting stripped down and cut up to fit the JRSC throttle body plate. Will be replacing the bearings, coupling, and seals.

Posted via FF Mobile

disciplerocks is offline  
    Reply With Quote