Focus Fanatics - View Single Post - NEW! CFM Front Lower Brace 2000-2010 Focus including SVT!
View Single Post
Old 05-25-2011, 04:48 PM   #11
cfmfocus2
FF Affiliate
 
Join Date: May 2005
Fan#: 22843
Location: longwood, FL
What I Drive: Ford focus svt

Posts: 803
FF Reputation: 9 cfmfocus2 Good Standing Member
Buy-Sell-Trade Rating: (6)
The 3 inch Off road pipe would not fit the standard fitment bar given there would be only 1/4 inch clearance with our cfm 2 1/2 off road pipe.

The lower fitment one would work. The lower fitment bar is about 1.4 inches lower the lowest point on the svtf being the bottom of the svtf header flange. You could take a tape measure and measure 1.4 inches below the header flange to have an idea what you are looking at for ground clearance.

The main concern I would think is going over speed bumps. If both wheels go over the speed bump, the vehicle would be raised over it. The lowest point of the bar being at the subframe right at the front wheels.
__________________
William - Sales Dept.
407.339.9211
Please e-mail or call me for quicker response.
cfmfocus2 is offline