Focus Fanatics - View Single Post - STFT = Lambda ... ?
View Single Post
Old 04-11-2011, 07:07 PM   #6
1turbofocus
FF Affiliate
 
1turbofocus's Avatar
 
Join Date: Oct 2003
Fan#: 1123
Location: Belmont, NC
What I Drive: 2000 ZX3 / 2002 SVT Turbocharged

Posts: 21,680
FF Reputation: 153 1turbofocus Excellent Standing Member1turbofocus Excellent Standing Member
Buy-Sell-Trade Rating: (28)
Quote:
Originally Posted by iminhell View Post
Sweeet!



Bear with me here.

So if my WBO2 reads 'rich' (which is richer than 0.68 Lambda) at very high RPM's, over 6k and over 800 counts, but my STFT reads 0.85, which is what I'm commanding ... Then I should assume it's my timing that needs to be adjusted, correct?
Because firing the plug earlier would allow more burn time and bring the WBO2 back to where it should be.
Or am I thinking about this wrong?
Not exactly if your WB reads rich then you need to change your MTF IF you have the base fuel tables set to what you want the targed to be

Set your base fuel tables to what lambda target you want then change the MTF to get the AF to match what AF/lambda you want

Timing will do little to change the AF

Tom
__________________
Focus-Power: Your #1 Source for Ford Focus Speed, Tuning & Performance!

Customer Support
AIM: hpdyno
Email: hpdyno@aol.com
Phone: 704-249-3745
Site: focus-power.com

Elder 1turbofocus
1turbofocus is offline  
    Reply With Quote