ok well after puting a powerworks kit on my svt and using the "search"
alot and some emails and some phone calls , i put together a little list of
service/replacement parts
------------------------------------------------------------------
Powerworks belt tensioner
This is the complete interchange cross referance for the tensioner
GATES 38112 ( i have used this one )
CARQUEST 89240
DAYCO PRIVATE LABEL 305240
DYNAFLEX by DAYCO 305240
EAGLEMOTIVE 305212
GOODYEAR 49212
KOOLKLUTCH 180240
MARK IV AUTOMOTIVE 305212
NAPA 38112
MIGHTY 305240
ORIGINAL EQUIPMENT DATA 21000684
ORIGINAL ........................... 21 006508
ORIGINAL ........................... 2 1007465
PARTS MASTER/DAYCO 89240
PROLIANCE READY-AIRE 1989
VISTEON 800110
(info from FF)
Powerworks belt size
6-rib replacement
00-02 5spd/AUTO and SVT = 87.5” long, ’
03-04 5spd/AUTO = 86.5” long
dont really need part number just go to a auto
parts store and tell them the size you need
(info from Powerworks)
Oil filter relocation:
Parts were made by Perma-cool but don’t make them no more..
Derale performance makes parts that are just the same
( can be found on Jegs.com )
Spin on block part. Derale #259-15746 Spin-On Adapter • Dual 1/2" NPT Side Ports • Engine Thread Size:3/4"-16
Filter mount Derale #259-25709 Single Oil Filter Mount • Side Ports • 1/2'' NPT Ports • Filter Threads:3/4'' – 16
(info from kwk vs66)
Intercooler pump (same as SVT lightning)
Ford Racing Intercooler Pump M-8501-L54
(info from FF)
Idler pulley
Gates 70 mm idler 38018
dayco idler pulley 89033
i have the right part number in my tool box
i need to put it up here
------------------------------------------------------------------
PDFs
PW C.A.R.B. infoCARB EO: D-587
http://arb.ca.gov/msprog/aftermkt/devices/eo/D-587.pdf
(thanks to shlbygt)
PW directions
http://www.webtrendsguy.com/focus/fo..._man_v2-04.pdf
(thanks to focus311)
---------------------------------------------------------------
hope this might save some people some time if it can be added to the Stickied Threads
..