Originally Posted by iroc34
Posted via FF Mobile
Well I don't think there is any measurement or any thing. I would try just sliding it fwd or back to see if it changes any thing.
It appears that you are correct.
I moved the metal bracket that the RH Hydralic Mount is bolted to back to the factory location (covered the paint wear marks in the frame) and the vibration is a lot better.
I guess the engine moved after I unbolted the RH Mount with a jack under the oil pan and I didn't move the bracket back to the factory location after I installed the new motor mount.
I'm still going to replace the dog-bone and transmission mounts for piece of mind.
Thank you to all the members for your help!