Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Mikealicious' Buttonwillow experience
View Single Post
Old 10-03-2010, 06:01 PM   #28
mikealicious
'Merica
 
mikealicious's Avatar
 
Join Date: May 2007
Fan#: 47077
Location: Bay Area, Cali, United States
What I Drive: 2002 Black SVT (gone), 2012 SEL

Posts: 1,701
FF Reputation: 8 mikealicious Good Standing Member
Buy-Sell-Trade Rating: (10)
Quote:
Originally Posted by tb1999 View Post
Connect them to the brake switch and throttle. You will need to add a microswitch to the pedal or TB to get an input for the throttle light.

Check out some of my older vidoes on youtube (fsp505), you'll see the lights I rigged for this in my car.

YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


It helps for knowing when you are actually braking and applying power on corner exit. Cheap way to get basic data in your videos for analysis.
wow. that's actually a really good idea. when I first read your post, I didn't think it'd be something I'd want to do, but after watching your video, I can see how that would be very useful in studying your lines/braking/accelerating on the track. Seeing as how I've only got two lights, I'd do the red for braking and green for WOT. where'd you get the microswitches from? and how would you connect them? if it was at the throttle body, how would you do it for WOT? not sure how you'd fix/mount something to that. and for braking, was that any amount of braking force? or for like 1/2 or full braking?
__________________
Visit here to see fast cars and races. ---> YouTube: mikealicious2k5
mikealicious is offline  
    Reply With Quote