I've been a ford tech for 10yrs. My 'research' WAS through ford. Do yourself a favor and get out of this thread while you still have the minimal rep. you have. the way your blabbering it's declining pretty fast....
Originally Posted by forcedfocus
Is this a research paper now I have to site my sources? Do yourself a favor and search somewhere off of this site and you will actually find some good information. People don't like it when you cross post from FJ over here for whatever reason. And there are many other places to get information as well. Im not saying there is no good info over here because there is, just to look elsewhere in addition to FF.
My original point is to spend 4k on a cgi block and forged crank for 5-600whp it totally unnecessary when people are doing it on the stock stuff. A stock block and crank can be had for less than 300 bucks. Its just like with the hondas people say that you have to have a sleeved block to do over 500whp when people are doing 700whp, shit, I know a guy doing 500whp on a stock 80k mile GSR motor.
Oh, and people have done as much as 340whp&wtq on a bone stock zetec.