1) Two SVT Side Mirrors (Will require painting) Part# FO1320314 (Left) & FO1321314 (Right)
3) Torx Screwdriver
Remove the plastic cover. Start by gently pulling/lifting the backside and then pull the cover off.
Using a Torx Screwdriver, remove the mounting screw.
Unplug the Mirror.
Remove the rubber grommet. This thing falls off really easy so be careful.
Use a socket/rachet and remove the second mounting bolt. You will need to remove the foam insullation for easier access.
Remove the old side mirror.
Feed the wires from the new mirror through the hole.
Reinstall the rubber grommet.
Reinstall the side mirror.
Install the painted mirror caps. "I had a clear film installed to protect the pain against rock chips."
Keywords: svt mirror install, svt mirrors installation, svt side mirrors how to, svt mirror how to