With that…..on with the STS install.
Have a cup of coffee. This is going to be LONG.
Note: You’ll see I used the word gently several times.
If you have to force it, take a deep breath, and come back to it in a little more relaxed manner.
1) Remove the shift boot:
At the rear of the boot, with your left hand, push in and pull up on the boot,
while with your right hand, gently push in and pry up with a screwdriver.
Pull the boot up and over the shifter. There’s no need to remove it completely.
Last edited by WD40; 10-08-2004 at 06:39 PM.