Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - LED Interior Mod question
View Single Post
Old 10-06-2004, 02:35 AM   #5
ouikikazz
Focus Fanatic
 
Join Date: Apr 2004
Fan#: 6707
Location: Staten Island, NY
What I Drive: 2k2 Infra-Red SVT Focus

Posts: 1,711
FF Reputation: 1 ouikikazz Good Standing Member
Buy-Sell-Trade Rating: (9)
Quote:
Originally posted by RockyNBullwinkle
If you have heated seats you need to wire in a resistor for the LED's in those switches as well as the traction control button if you have that as well. I used a 1k ohm resistor inline with a 2 volt Ultrabright 5mm LED that puts out 3000 mcd luminosity. LED's have two leads coming from the botton of a plastic enclosure. Bulbs look like regular light bulbs from a lamp in your house but smaller.
i've worked with LEDs before adn soldering, its just i dont want to tear apart my interioir to see what i need then reassemble it, buy the LEDs and everything, then tear it apart again then reassemble one more time...tedious work that could be avoided with some much appreciated help :)
ouikikazz is offline  
    Reply With Quote