Focus Fanatics - View Single Post - p0456 code on stock focus
View Single Post
Old 01-01-2010, 09:30 PM   #4
BC_ZX3
DTC P0606
 
BC_ZX3's Avatar
 
Join Date: Jul 2007
Fan#: 48751
Location: Vancouver, BC, Canada
What I Drive: 2001 Red ZX3 Turbo

Posts: 2,834
FF Reputation: 86 BC_ZX3 Excellent Standing Member
Buy-Sell-Trade Rating: (3)
The EVAP charcoal canister is at the rear of the fuel tank. Sorry, no pics. You need to get underneath to have a look. Check the hoses aren't loose or perished.

The purge valve is in the engine compartment, passenger side (arrowed). It has a small vacuum line going from it to the intake manifold (#1) and a second larger line (#2,#3 - arrow at each end) going from the valve to the manifold, as well. There's an electrical connector on top. Check none of the lines exiting from it are damaged, crimped or loose. Most importantly, check the U-shaped line going into it. (Not marked in pic.) The system is supposed to be "air-tight". Lines sometimes get damaged when work is being done on some engine component close by.

A "smoke test" is usually used to find leaks from what I'm told.

The purge valve may have also failed or be stuck but that would probably throw a different code P0455.

IMO, it's more likely the leak is at the fuel tank end but a quick check of the engine compartment pieces wouldn't hurt.

BC_ZX3 is offline  
    Reply With Quote