Focus Fanatics - View Single Post - 2008 Halo Projector Headlights Install
View Single Post
Old 05-20-2009, 05:29 PM   #1
m3grady2
Focus Enthusiast
 
Join Date: Aug 2008
Fan#: 58598
Location: Maryland
What I Drive: 2008, silver, Ford Focus SE Sedan

Posts: 115
FF Reputation: 1 m3grady2 Good Standing Member
Buy-Sell-Trade Rating: (0)
2008 Halo Projector Headlights Install

I bought the Halo projectors for the 2008-2010 focus seen on k2motors and ebay.. i'll post the pics and discuss the lights afterwards

ok guys thanks for being patient. Install on this was pretty simple i followed this write up by bradwhite to remove the grill and headlights.
http://www.focusfanatics.com/forum/showthread.php?t=161006
This took about 15 mins. Overall install took about an hour and 15 minutes. I had some trouble separating the lights from the adaptors. I
also had a plug n play Hid kit (h13) in there also. I left that set up, so if (when) i decide to get hid's for these it'll be a 5min job. The lights fit
pretty well, they are the same as the oem so that wasn't even an issue. ok to the pics!!!!!!!























The low down on the bulbs are everything was plug and play into the stock harness. Except the led's and Angel eyes. I was unable to hook those up, so if anybody i out there can help me with that i would more than appreciate it. The bulbs on these lights are h9, and they are hi-beam and low beam. i took some pics of the light spread in the stock lights with hid's, and i'll try to get some pics of the new lights tomorrow for you guys. the cutoff on these is definitely more pronounced than the stock lights, and i'm pretty sure i'll end up throwing some h9 hid's in these too. Whew.. ok now lets discuss away, Lemme know if you like, if you don't, leave a reply.



Last edited by m3grady2; 05-24-2009 at 08:51 PM. Reason: ok i promised you pics, there's lots of pics lol
m3grady2 is offline  
    Reply With Quote