I have the whole harness. But someone had cut the wires going into the doors. I have all the ends so I could splice them all together. Here were my questions. I haven't gotten to tear into the car and check any of this out yet.
1. Are the latching mechanisms and the door key mechanisms a different piece so that I can retain my original key.
2. Does it require the changing of the GEM module. I have heard that talked about, but don't know all that it does. I don't plan on using the factory remote locks (don't have the remotes) so is the GEM necessary.
3. The donor car is an 01 with an SPI and mine is an 03 with a Zetec. Does that make any difference?